+38(093)0866362.png){kind=small}
bitumcentr@gmail.com
Bituminous latex emulsions
Seamless waterproofing (coating) using bituminous-latex emulsion Flexigum, bituminous-polymer mastics Mastigum Speed, Flexigum Paste
Technology, the so-called seamless sprayed, coating, liquid waterproofing (liquid rubber) is an anti-corrosive coating, performing the function of waterproofing of building structures, foundations of buildings. Such coating allows you to safely insulate hard-to-reach areas of the foundation, with complex geometry, where the use of roll materials is ineffective.
Flexigum is a two-component waterproofing material consisting of a bitumen-latex emulsion with a high content of synthetic latex based on polychloroprene rubber and coagulant.
Mastigum Speed - a two-component mastic, consisting of bitumen-latex emulsion and cement-polymer powder.
Flexigum Paste is a one-component mastic consisting of polymer bitumen modified with latex
All of the above materials, regardless of how they are applied, create a seamless coating on the surface, the materials perfectly fill all cracks, seams and pores of the treated surface, thereby providing ideal protection from water, steam and any other corrosive liquid.
Flexigum bituminous latex emulsion can only be applied by airless spraying, while Mastigum Speed and Flexigum Paste can be applied by roller and brush. All materials are characterized by cold application and instant curing.
The quality of waterproofing coating obtained on the basis of Flexigum, Mastigum Speed, Flexigum Paste is superior to many known domestic and foreign analogues - water practically does not penetrate through the polymer to the foundation or basement walls. You can easily apply the material to any surface, and the plane of their location does not matter, whether they are vertical, horizontal or inclined.
It is not economical to buy or rent an expensive installation for a single use. Therefore, when carrying out independent waterproofing work on the foundation it is advisable to use two-component bituminous mastic Mastigum Speed or bituminous-polymer mastic Flexigum Paste, which can be applied by roller or brush. Any method of applying emulsion or mastic to the surface of the structure is intended to produce a seamless monolithic coating.
When waterproofing by hand, the thickness of the layer of coating and mastic consumption will be slightly higher than when spraying (about 5-10%). Therefore, when planning the processing of large areas of the surface, it is necessary to consider the economic benefits in choosing a particular method of application of the material. There is no doubt that the quality of waterproofing performed by a mechanized method will be higher. This is due to the fact that the emulsion fed under pressure from the installation on the surface of the foundation penetrates deeper into its pores than when applied by roller. This reduces the consumption of the material and ensures maximum adhesion. In addition, spraying the entire waterproofing procedure can be completed in one day.
Flexigum
Order Now
Liquid rubber Flexigum - bituminous latex emulsion. Waterproofing of foundations, underground and above-ground building structures, transport constructions, including: structures of tunnels and subway stations, protection against biogenic sulfuric aggression of collector tunnel vaults, protection against corrosion of concrete and metal tanks, underground utilities.
Flexigum HP
Order Now
Flexigum HP liquid rubber is a special modification of flexigum bituminous latex emulsion. Waterproofing protection of the earth bed and road base; waterproofing protection of the roadway of bridges, sidewalks, overpasses, viaducts, overpasses and pipes on highways. Discounts for volume and first order.
Technology, the so-called seamless sprayed, coating, liquid waterproofing (liquid rubber) is an anti-corrosive coating, performing the function of waterproofing of building structures, foundations of buildings. Such coating allows you to safely insulate hard-to-reach areas of the foundation, with complex geometry, where the use of roll materials is ineffective.
Flexigum is a two-component waterproofing material consisting of a bitumen-latex emulsion with a high content of synthetic latex based on polychloroprene rubber and coagulant.
Mastigum Speed - a two-component mastic, consisting of bitumen-latex emulsion and cement-polymer powder.
Flexigum Paste is a one-component mastic consisting of polymer bitumen modified with latex
All of the above materials, regardless of how they are applied, create a seamless coating on the surface, the materials perfectly fill all cracks, seams and pores of the treated surface, thereby providing ideal protection from water, steam and any other corrosive liquid.
Bituminous latex emulsion Flexigum
Two-component elastic bituminous mastic Mastigum Speed
Flexigum bituminous latex emulsion can only be applied by airless spraying, while Mastigum Speed and Flexigum Paste can be applied by roller and brush. All materials are characterized by cold application and instant curing.
The quality of waterproofing coating obtained on the basis of Flexigum, Mastigum Speed, Flexigum Paste is superior to many known domestic and foreign analogues - water practically does not penetrate through the polymer to the foundation or basement walls. You can easily apply the material to any surface, and the plane of their location does not matter, whether they are vertical, horizontal or inclined.
It is not economical to buy or rent an expensive installation for a single use. Therefore, when carrying out independent waterproofing work on the foundation it is advisable to use two-component bituminous mastic Mastigum Speed or bituminous-polymer mastic Flexigum Paste, which can be applied by roller or brush. Any method of applying emulsion or mastic to the surface of the structure is intended to produce a seamless monolithic coating.
When waterproofing by hand, the thickness of the layer of coating and mastic consumption will be slightly higher than when spraying (about 5-10%). Therefore, when planning the processing of large areas of the surface, it is necessary to consider the economic benefits in choosing a particular method of application of the material. There is no doubt that the quality of waterproofing performed by a mechanized method will be higher. This is due to the fact that the emulsion fed under pressure from the installation on the surface of the foundation penetrates deeper into its pores than when applied by roller. This reduces the consumption of the material and ensures maximum adhesion. In addition, spraying the entire waterproofing procedure can be completed in one day.
Products
Flexigum
Order Now
Liquid rubber Flexigum - bituminous latex emulsion. Waterproofing of foundations, underground and above-ground building structures, transport constructions, including: structures of tunnels and subway stations, protection against biogenic sulfuric aggression of collector tunnel vaults, protection against corrosion of concrete and metal tanks, underground utilities.
Packaging:
Barrels of 200 kg.
Barrels of 200 kg.
Expense:
Depends on the thickness of the layer: "FLEXIGUM" - 2 mm - 3.50 kg/m²; 4 mm - 7.00 kg/m²; 6 mm - 10.50 kg/m². Surface drying - instant.
Depends on the thickness of the layer: "FLEXIGUM" - 2 mm - 3.50 kg/m²; 4 mm - 7.00 kg/m²; 6 mm - 10.50 kg/m². Surface drying - instant.
Flexigum HP
Order Now
Flexigum HP liquid rubber is a special modification of flexigum bituminous latex emulsion. Waterproofing protection of the earth bed and road base; waterproofing protection of the roadway of bridges, sidewalks, overpasses, viaducts, overpasses and pipes on highways. Discounts for volume and first order.
Packaging:
Barrels of 200 kg.
Barrels of 200 kg.
Expense:
Depends on the thickness of the layer: FLEXIGUM HP - 3 mm - 5.3 kg/m².
Depends on the thickness of the layer: FLEXIGUM HP - 3 mm - 5.3 kg/m².
